- phuonghoa@songanhtb.com
- 0908 816 866
- tansuu@songanhtb.com
- 0907 164 352
Infrared Moisture Determination Balance model FD720
Infrared Moisture Determination Balance
Manufacturer : KETT, model FD-720
Advantages:
FD-720 is the most advanced new Moisture Balance. Equipped with high accuracy analytical balance and new designed long life (20,000 to 30,000 hours) Mid-wave Infrared quartz heater and 6 different measurement modes. The unique Bias function allows adjustment to the data obtained by other measuring methods or other testers..
1-Simple operation:
To measure the sample, the operator only choose the program, put sample into the sample dish, shut the lid and push the “ START” button. When the process has been finished, the results has been displayed on the screen until the new measurements begins
2- Long life mid-infrared quartz heater (20,000 to 30,000 hours):
- Measurement Method:Heat drying and weight loss
- Sample mass: 0.5~120g
- Measurement subject: Moisture / Solid content / Weight
- Reproducibility (Standard deviation): Sample with a weight of 5g or higher : 0.05%
Sample with a weight of 10g or higher : 0.02% - Measurement range: 0~100% (wet base , solids),0~500% (dry base)
- Resolution: 0.01% , 1mg
- Temperature range: 30~180°C
- Measurement modes: Automatic operation mode
o Timed operation mode (1~240min or continuous)
o High-speed drying mode
o Low-speed drying mode
o Stepped drying mode (max of 5 steps)
o Predictive measuring mode
- External output: RS-232C interface
- Environmental conditions: Temperature 5~40°C , Humidity : max of 85%RH Pollution degree 2 , Altitude up to 2000m
- Sample dish: SUS (diameter 130mm, depth 13mm)
- Heat source: Mid-wave infrared quartz heater (200Wx2)
- Power supply: AC100~120V/220~240V (50/60Hz)
- Power consumption: max 900W
- Size and Weight: 220(W)x415(D)x190(H), 4.5kg ,
- Accessories: Sample dish 2 pcs, Sample dish handler 2 pcs, Wind shield, Sample dish tray, Spoon and spatula set, Spare fuses(T8A 250V) 2 pcs, Power cord, Aluminum sheets(20 pcs)x2 , Operating manual
- Options: Printer set (Printer VZ-330), Data logger software(KDL-01),Radiation thermometer calibration kit GF-100